Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Do not use the appliance near flammable liquids or gases.
Protect yourself against electric shock!
Avoid any contact with earthed parts.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
cable. Keep them in a sufficient distance from the place of
your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload your appliance!
You will work better and safer at output for which the
appliance has been designed.
Use the correct appliance!
Do not use an appliance with low power for heavy work.
Do not use the appliance for purposes for which it has not
been designed.
Wear appropriate working clothes!
Do not wear loose clothes or jewels as they could be
caught by movable parts. For working outdoors, we
recommend shoes with a non-slip sole. Wear a hairnet if
.
your hair is long
Use protective aids!
Protective glasses should always be worn. Use a
breathing mask when working in a dusty environment.
Do not use the cable for any other purposes than for
which it has been designed!
Do not use the cable for pulling the plug out of socket;
protect it against excess temperatures and sharp edges.
Secure the processed materials!
To secure the processed material, use a clamping device
or a vice. Materials will be secured better this way than
using your hand.
Avoid abnormal body posture!
Make sure you are stable to keep balance at all times.
Care for your tools!
Keep the tools sharp and clean; you will be able to work
better and safer. Follow the maintenance regulations and
tool replacement instructions. Check the tool cable
regularly and have it replaced by an authorised specialist if
damaged. Check the extension cable regularly and replace
it if damaged. Keep the handles dry, with no signs of oil
and grease.
Pull the plug out of socket!
When not using the appliance, before maintenance or
when replacing the grinding disk.
Never leave tools that are switched on in the
appliance!
Make always sure all wrenches and adjusting tools have
been removed before switching the appliance on.
Prevent unintentional appliance switch-on!
Make sure the switch is in the "off" position when plugging
the appliance.
Extension cable for outdoor use:
Authorised extension cables with appropriate marking
must only be used outdoors.
Pay attention!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
All manuals and user guides at all-guides.com
Check whether the appliance is not damaged!
Protection equipment and slightly damaged parts need to
be checked carefully whether they still work perfectly
before being used again. Check whether the movable
components work perfectly and are not jammed or
damaged. All components must be fitted correctly and
satisfy all conditions to ensure perfect working of the
appliance. Any damaged protection equipment and
components must be repaired or replaced in an authorised
shop unless otherwise specified in the Operating
Instructions. Have any damaged switches replaced in a
service shop. Do not use devices where the switch cannot
be turned on and off.
CAUTION!
Use of other extensions and accessories can represent a
risk of injury.
Have your appliance repaired by an electrician only!
This appliance is in accordance with appropriate safety
provisions. Repairs can only be executed by an electrician,
otherwise there is a risk of injury for the user.
Protection against Burns
Given unfavourable conditions in the power supply the
equipment may cause the voltage to drop temporarily. If
the supply impedance "Z" at the connection point to the
public power supply exceeds 0,233 Ω EN 61000-3-11 it
may be necessary to take further measures before the
equipment can be used as intended from this power
supply. If necessary, you can ask your local electricity
supply company for the impedance value.
The arc welding machines were developed thanks to
many-year experience in the welding profession. Provided
that the methods of operation prescribed by the
manufacturer are provided, they will guarantee a high level
of operating safety in addition to very good welding
properties. For this reason, the management should take
care to ensure that every person working with the machine
has access to this information.
Protection against Burns:
Sparkles, clinker, hot metal and radiation may be a serious
hazard in arc welding putting eyes and skin at risk. The
closer is the user or another person to the welding site, the
bigger is the hazard they are exposed to. The user and
any other persons working adjacently to the welding site
should wear adequate protective clothing and personal
protective equipment. Protective gloves (special gloves for
welding) and a headgear are indispensable. Goggles are
essential and must be worn to protect the user's eyes
against radiation, sparkles and hot metal.
Fire Protection:
As hot metal, sparkles and clinker are generated by arc
welding; precautions must be taken to prevent fire and
explosions. Suitable fire extinguishers must be available in
the area of welding site and any fire-hazardous materials
should be removed from the area. The minimum distance
of such materials from the welding area should be 10
metres (35 feet). Never weld empty tanks that contained
toxics or explosives. Such tanks have to be cleaned very
thoroughly before welding.
Never get down to welding if there are high concentrations
of dust, easily inflammable gases and fire-hazardous
vapours from liquids (such as petrol) in the atmosphere/air.
Having completed the welding job, take care to cool down
the welded parts before anybody could touch them or
before they are in contact with fire-hazardous or ignitable
materials.
9
Advertenties
Inhoudsopgave
