Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Place the cookware with the bottom diameter
larger than 160 mm centrally between two
sections.
Flex Bridge Standard mode
This mode is activated by default when you
activate the function. It connects the sections
into two separate cooking areas. You can set
the heat setting for each area separately. Use
the two control bars on the left side.
Correct cookware position:
100-160mm
> 160 mm
Incorrect cookware position:
Flex Bridge Big Bridge mode
To activate the mode press
the correct mode indicator
connects the three rear sections into one
cooking area. The front section is not
connected and operates as a separate
cooking zone. You can set the heat setting for
each area separately. Use the two control
bars on the left side.
Correct cookware position:
Make sure to place the cookware on the three
connected sections. If you use cookware
smaller than two sections the control bar
blinks and after 2 minutes the zone
deactivates.
until you see
. This mode
ENGLISH
67
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
