Replacing Filters; Cleaning Care; Cleaning The Filters; Cleaning The Exterior & Interior - Winix Zero S Gebruikershandleiding
Inhoudsopgave
REPLACING FILTERS
item: 116130
CLEANING CARE
Cleaning the Filters:
Use a vacuum cleaner or soft brush to clean the Pre-Filter
• If it is excessively soiled, rinse in room temperature water .
• Do not use detergent or soap .
• Allow the filter to dry for 24 hours or more before using .
• Intervals between filter cleaning may vary depending on
the air quality in the environment .
• Do not use hot water over 40°C .
Particle Sensors Care
1 .
Use a damp cotton swab to wipe the
lens and intake area of the Particle
Sensor .
• To clean the sensor area, use
only water . Do not use volatile
substances such as alcohol or
acetone .
2 .
Wipe away any remaining moisture
with a dry cotton swab .
N O T I C E
• Do not use benzene, alcohol, or other volatile fluids,
which may cause damage or discoloration .
English
Cleaning the Exterior & Interior:
Wipe with a soft damp cloth using room temperature water .
• Afterwards, wipe it down with a clean, dry cloth .
Open the front panel and clean the interior with a vacuum
cleaner .
• For optimal performance, clean every 1 - 2 months.
N O T I C E
Lens
• When cleaning the unit, always unplug the power cord
first and then wait until the unit has cooled down .
• Never disassemble, repair, or modify this unit yourself .
Cotton swab
• Do not use flammable sprays or liquid detergents .
• Do not allow children to clean or maintain the unit .
• Before cleaning or maintaining, ensure unit is unplugged .
After replacing a filter, press
the Filter Reset Button for at
least 5 seconds .
Zero S
9
Inhoudsopgave
