Inhoudsopgave
Advertenties
For a right setting of the device:
• 90 degrees Flexion / 0 degrees Extension: place quick release pegs in
hole marked "R" and hole marked "3" and "4" (as shipped).
• 45° Elexion place quick release peg in hole marked R, 1 and 3.
Orientation Adjustment
Note: While the device is available as a left or right orientation, it can be
converted to the opposite orientation by reversing the Left (L) or Right
(R) pegs at the base of the Hip Plate, and readjusting the Flexion/
Extension Stops for appropriate range of motion control. The device will
be set at 90 degrees flexion and 0 degrees extension out of the box.
Device Removal
To remove the device,
1. Detach Compression System Handles slowly from the belt to loosen
and re-attach them to the sides of the Adjustable Belt.
2. Detach the Thigh Strap.
3. Detach the Overlap Closures and remove the device.
Note: To ensure a proper fit, ensure the Belt Compression System is
stretched to its full width before re-applying the device.
Accessories and Replacement Parts
Please refer to the Össur catalog for a list of available replacement parts
or accessories.
USAGE
Cleaning and care
Device plastic can be washed with a damp cloth and mild soap.
Washing the device with the soft goods detached allows for more
thorough cleaning.
• Hand-wash using mild detergent and rinse thoroughly.
• Air dry.
Note: Do not machine-wash, tumble dry, iron, bleach, or wash with fabric
softener.
Note: Avoid contact with salt water or chlorinated water. In case of
contact, rinse with fresh water and air dry.
DISPOSAL
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.
8
Advertenties
Inhoudsopgave
