Toro 74048TE Handleiding pagina 49
Figure 55
Right control lever shown
1. Tracking screw
g334735
2. Access hole on the front
cover panel
Checking the Tire Pressure
For Machines with Pneumatic
Tires Only
Service Interval: Every 50 hours/Monthly (whichever
comes first) For machines with
pneumatic tires only.
Maintain the air pressure in the caster tires and rear
tires at 90 kPa (13 psi). Uneven tire pressure can
cause uneven cut. Check the tires when they are cold
to get the most accurate pressure reading.
Checking the Wheel Lug
Nuts
Check and torque the wheel lug nuts to 122 to 136
N∙m (90 to 100 ft-lb).
47
Figure 56
g001055
