Start-up
▪ Clean the device before use as described in the chapter on "Cleaning and Care".
▪ Cut the food, for example fruit and vegetables, into small pieces and fill the mixing container (1)
with these. Fill up to the 600 ml mark on the mixing container (1) as a maximum. Tip: Always add
a little liquid to the mixing container (1). Add ingredients in the following order: Hard ingredients
first, then soft ones.
▪ Now screw in the blade unit (2) by twisting clockwise onto the mixing container (1).
▪ Place the mixing container (1) on the drive unit (4). Ensure that the markings
unit (2) align with those on the drive unit (4). Then turn the mixing container (1) in a clockwise
direction by applying gentle downwards pressure until it locks into place.
Caution: The mixer will only switch on if the mixing container (1) is fitted correctly. A safety
shutdown prevents the device from operating without the mixing container (1).
▪ Now insert the mains plug into the socket.
▪ Press down the start button (3) to start the mixing process.
The longer the start button (3) is pressed down, the smoother the food will be blended.
▪ As soon as the desired consistency is achieved, release the start button (3) and remove the mains
plug.
▪ Remove the mixing container (1) from the drive unit (4). To this end, turn the mixing container (1)
in an anti-clockwise direction by applying gentle downwards pressure.
▪ Unscrew the blade unit (2) by twisting anti-clockwise from the mixing container (1). You can now
pour out the smoothie or juice. Alternatively, you can also use the mixing container (1) as a bottle.
Screw the lid (5) onto the mixing container (1) to do this.
Crushing ice cubes
Insert up to 4 ice cubes and close the mixing container (1) with the blade unit (2). Press the start
button for just a few seconds (3). As soon as the ice cubes have returned to the bottom of the mixing
container (1), you can press the start button (3) again for a few seconds. Repeat the process until the
crushed ice has the desired consistency.
12
Cleaning and Care
Remove the mains plug after use. Never immerse the drive unit (4) in water, simply wipe it with a
damp cloth. Do not use any abrasive cleaning agents. Take care that when cleaning the blade unit (2)
you do not injure yourself on the sharp blades.
For simple cleaning, you can put the mixing container (1) and the lid (5) in a dishwasher.
on the blade
Mixing container (1)
Blade unit (2)
Drive unit (4)
Lid (5)
Dishwasher safe
Can be rinsed
Wipe with a
under running
damp cloth
water
13