Cleaning The Hepa Filter - Amazon Basics B071Vncnld Handleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
Cleaning the HEPA Filter
•
Pull the tab on the right side of the exhaust grid
outwards and remove the grid.
•
Pull the tab on top of the filter downwards and remove
the HEPA filter
•
Rinse the filter under cold water.
•
Dry it afterwards.
•
Put the filter back in place and reinstall the exhaust grid.
NOTICE
Troubleshooting
Problem
The appliance does not start.
Weak suction power.
Motor is abnormally noisy.
12
All manuals and user guides at all-guides.com
8
.
Never use the appliance without filters installed. This can
cause power loss or damage to the appliance.
Solution
•
•
•
•
•
•
•
•
•
•
Connect the power plug properly.
Check if the electrical outlet is powered.
Check if the on/off switch is on.
Check if the flexible hose, extension tube or
any of the accessories are obstructed.
Remove and clean the filters.
Stop using the appliance immediately.
Check if the hose, tube or any of the
accessories are obstructed.
Remove the obstruction.
If the noise continues, power off the appliance
and disconnect the power plug.
Contact your service agents.
5
Inhoudsopgave
