is not liable for damage caused by
improper use or incorrect operation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material
properly.
• Surface Cleaner
• Main tube
• Extension arm
• Adapter*
• Translation of the original instruc-
tions
* for other common pressure wash-
ers (Rated pressure: Max. 11.5 MPa /
1668 psi), e.g. Kärcher.
Overview
The illustrations for the
device can be found on
the front fold-out page.
1 Adapter (Third-party device)
2 Coupling nut (Adapter)
3 Coupling nut
4 Extension arm
5 Main tube
6 Connection
7 Housing
8 Handle
9 Pressure regulator
(Fig. B)
10 Spray nozzle
11 Safety clip
Technical data
Surface Cleaner .............. PFR 28 B3
Suitable for pressure washers with
the following performance data:
Rated pressure(p)
............................ 11.5 MPa / 1668 psi
Permissible pressure (p max)
............................... 18 MPa / 2611 psi
Max. inlet temperature (T
...................................... 60 °C / 140 °F
Only use the device with pressure
washers with a permissible pressure
(p max) of: 9-18 MPa (90-180 bar)
Safety information
This section deals with the basic
safety instructions for using the
device.
Pictograms and symbols
Symbols on the device
Attention!
Read the instruction manual
Do not reach under the surface
cleaner during operation.
Sweep open spaces before us-
ing the device.
Meaning of the safety
information
DANGER! If you do not observe
this safety instruction, an accident will
occur. The result of which is severe
bodily injury or death.
WARNING! If you do not observe
this safety instruction, an accident
may occur. The result of which is
likely severe bodily injury or death.
CAUTION! If you do not observe
this safety instruction, an accident
will occur. The result of which is likely
minor or moderate bodily injury.
NOTICE! If you do not observe this
safety instruction, an accident will oc-
cur. The result of which is possible
damage to property.
GB
IE
NI
)
in;max
5