LUND 67840 Originele Instructies pagina 13
Inhoudsopgave
Beschikbare talen
Beschikbare talen
EN
Juicing
Fruit and vegetables shall be washed and divided into smaller pieces than the inlet opening so that they can be easily placed in
the inlet opening. Fruit and vegetables with thick skin or which are not normally eaten should be peeled off . All seeds and hard,
unfi t parts of fruit and vegetables must also be removed.
Connect the product to the power supply and switch it on.
The on/off switch allows you to set three positions:
O - device switched off ,
ON - the auger rotates in a direction that makes it possible to squeeze the juice,
R - the auger rotates in the opposite direction to the normal operation. In this position, hold the switch in the ON position. Releas-
ing the pressure on the switch will return the switch to the off position - O. Use this product function only when a jam occurs that
causes the auger to slow down or stop.
Wait until the rotation is complete and then insert the fruit or vegetables through the inlet opening.
CAUTION! If the device begins to vibrate after switching it on, if it makes an unusual sound, or shows any other signs of malfunc-
tion, switch it off immediately, unplug it, and check for the cause of the malfunction.
For maximum juice yield, push the fruit or vegetables in the squeezer using the provided pusher. The shape of the pusher is
adapted to the shape of the inlet opening. Do not attempt to insert the pusher in the opposite direction, it may cause the pusher
to get stuck in the throw-in hole.
CAUTION! It is forbidden to press fruit or vegetables with any other means than the provided pusher. Especially using fi ngers,
hands or cutlery. It is also forbidden to use the pusher from another model of squeezer. The auger may catch your fi ngers, hand
or other object and cause serious injury and/or damage to the product.
When squeezing the juice, check constantly that the juice and pulp containers are not full and empty them if necessary. The juice
outlet opening has a plug. The plug should be open during operation (IX). It may only be closed while the juice container is being
emptied. If the plug is closed during operation, the bowl will overfi ll with juice, which can lead to juice leakage and electric shock.
If, during operation, the auger stops, for example due to placing too hard a fruit or vegetable in a bowl of product. You can fi rst try
changing the speed of the auger by pressing and holding the switch in the "R" position and then resuming operation. If this does
not work, turn the product off using the switch, unplug the power cord from the socket, then remove the product and remove the
cause of the jam from the product bowl.
Before resuming operation, check that no parts of the product have been damaged.
When you have fi nished squeezing the juice, turn off the product using the switch, wait for the rotation to stop completely, unplug
the power cord from the socket, remove the device and proceed with maintenance.
MAINTENANCE AND STORAGE
Caution! As the product is used for food preparation, maintenance must be carried out as soon as work is completed. Only proper
maintenance will ensure the proper level of hygiene.
When you have fi nished squeezing the juice, turn off the product, wait for rotation to stop completely, unplug the power cord from
the wall socket, disassemble the device and proceed with maintenance. The product should be cleaned immediately after use.
Dried fruit and vegetable residues can clog the openings of the fi lter cartridge, which can lead to a loss of performance or even
damage the product. If this happens, immerse the fi lter cartridge in warm water with dishwashing liquid and leave it to soak, then
clean with a soft brush and water with dishwashing liquid. Do not use metal brushes or dishwashers to clean the fi lter cartridge.
Excessive cleaning pressure may damage the cartridge walls.
In addition to the fi lter cartridge, all the parts that can be removed from the drive housing can also be immersed: bowl, juice and
pulp containers, bowl lid, pusher, frame with blades. All the above parts should be washed in the same way as the fi lter cartridge.
For cleaning, open the two plugs on the inside of the pulp outlet and the outside of the juice outlet. The plugs may only be closed
after the bowl has been cleaned and completely dried.
Clean the device housing with a soft cloth dampened with a water and mild detergent solution. Wipe dry. Do not use abrasive
cleaning agents.
Make sure all parts are cleaned and dried before connecting the device to the power supply. Store the product in dry, shaded
conditions. Protect the storage place from unauthorised access, especially by children. Store the product in the unit packaging
provided with the product. Do not place anything on the product.
O R I G I N A L
I N S T R U C T I O N S
13
Inhoudsopgave
