G Operating Instructions
Controls and displays
1. DCF radio symbol
2. Time
3. Alarm clock symbol
4. Day + month
5. Day of the week
6. Room temperature
7. Rotary wheel for focus
8. Reset
9. Alarm clock (ON/OFF)
10. Snooze / Light (snooze function /
backlight)
11. Celsius / Fahrenheit
12. Power supply unit connection socket
13. Battery compartment
A. Temp/ Flip button (projection settings)
B. Mode button
C. Up button
D. Down button
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from touching
uninsulated product parts that may carry hazardous
voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• Projection Alarm Clock
• Power adapter
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use
only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters,
other heat sources or in direct sunlight.
• As with all electrical products, this device should be kept
out of the reach of children!
• Do not operate the product outside the power limits given
in the speci cations.
• Do not use the product in areas in which electronic
products are not permitted.
• Do not use the product in a damp environment and avoid
splashing water.
• Do not position the product near interference elds, metal
frames, computers and televisions, etc. Electronic devices
and window frames have a negative effect on the function
of the product.
• Do not drop the product and do not expose it to any
major shocks.
• Do not modify the product in any way. Doing so voids the
warranty.
• Dispose of packaging material immediately in accordance
with the locally applicable regulations.
• Only use the article under moderate climatic conditions.
• The product is intended only for use inside buildings.
• Route all cables so there is no risk of tripping.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the
cable, never on the cable itself.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, adapter cable
or power cable is damaged.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to quali ed experts.
3