Cleaning And Maintenance - Hkoenig U600 Gebruiksaanwijzing
Inhoudsopgave
How to use your shoe polishing machine
1. Press the ON/OFF button on the top of the housing to start the machine.This button is pressed
once for ON and again for OFF.
2. To apply polishing cream to your shoe,lift your shoe and stroke the tap of the dispenser
gently.Natural color shoe cream can be used for any colored shoes.
3. It is strongly recommended that one of the polishing brushes is used for shoes applied natural
color cream and another one, for colored cream. Do not mix use of these two brushes,or
otherwise, it will affect the polishing result occasionally.
4. When polishing is done, press the ON/OFF button again to switch the machine off.
Refill the shoe cream
1. By looking through the wax box indication slot, you can notice when the shoe cream should be
refilled.
2. Unlatch the dispenser and have it move outward to open the dispenser cabinet.
3. Take the bottle out, loose the tap and fill in cream of the same kind.Put the spring and steel ball
in proper position before recapping the tap tightly.Also, make sure the exhaust hole on top of
the bottle is open.Or otherwise, shoe cream will not flow out smoothly when tap is
stroked.Actually , you can take the blocking pin out from the exhaust hole and throw it away at
the first time you have your bottle filled.
4. Put the cream bottle back into the cabinet and latch it in proper position on the machine.
Cleaning and maintenance
1. Unplug the unit before cleaning and maintenance.
2. Do not clean the machine with water jet.
3. Dust and mud on the mat can be cleaned by simply taken
it out from the machine and have it washed or cleaned by
vacuum cleaner.It is a good practice and important for
safety to have the mat dry thoroughly in cool area before
putting it back to the machine.Do not dry the mat under
strong sunshine nor in hot area.
4. When changing brush is seemed necessary ,unscrew the
fixing screw on the brush and pull it sideway to take it out
from the shaft.Replace the brush following the reversed
procedure.Remember to have the screw fixed on the flat
Inhoudsopgave
