BRIGHT 028268 Instructies pagina 11
Beschikbare talen
Beschikbare talen
3.3.1 Pre-set cooking programs
Note! Cooking time for different ingredients will vary
depending on the weight. Use a meat thermometer to
check the internal temperature of the meat.
● The default temperature is 180 °C and the default time
is 15 minutes.
● The information in the table is for reference only.
Pre-set
Temperature
Button
(°C)
French fry
200
Roast
175
Fish
165
Shrimp
160
Pizza
180
Chicken
185
Baking
160
Rotisserie
190
Dehydrator*
30 (30–80°C)
Reheat
115
*The settings for the dehydrator can be set from
30°C–80°C and the time can be set from 2 hours to 24
hours.
3.4 To use the rotisserie
Note! The rotation button can be used with any pre-set
program. The rotation icon will blink during use.
Figure 3
1
Attach one fork on one end of the rotisserie shaft
and tighten the screw.
2
Insert the food into the shaft and then attach the
other fork to the other end of the shaft, tighten the
screw.
3
Use the fetch tool to put the food inside the
pre-heated oven. Refer to"3.6 To use the rotisserie
fetch tool" on page 11.
4
Select a pre-set program or set the temperature
and time. Push the rotation button.
3.5 To attach the skewer
Figure 4
1
2
Time (min.)
3.6 To use the rotisserie fetch tool
15
Figure 5
25
15
extremely hot during use. Always use protective gloves
when touching hot surfaces.
12
15
3.6.1 To put in the rotisserie inside the oven
40
1
30
30/ split rotation
120 (2–24h)
12
2
3
3.6.2 To take out the rotisserie from the oven
1
2
3
4
Insert the rotisserie shaft into the skewer holder
and tighten the screw on each side as shown in
the illustration.
Insert the skewer through the hole and pinch the
end of the skewer so that the ending fit into the
slot.
Warning! Different parts of the product become
Hook the fetch tool into the grooves under the
rotary shaft. Make sure that the hooks are
correctly attached into the groove before you lift
the rotisserie accessory.
Insert the left side of the rotary shaft first into the
rotary bracket inside the oven. Make sure that the
rotary shaft is correctly attached to engage the
rotation.
Put the right side of the rotary shaft into the right
rotary bracket inside the oven. Unhook the fetch
tool and take it out.
Hook the fetch tool into the grooves under the
rotary shaft. Make sure the hook is correctly
attached into the grooves before you lift the
rotisserie accessory.
Lift the right side of the rotisserie fetch tool at a
slight angle and move it slightly to the right.
Lift the left side of the rotary shaft until it slides out
of the shaft bracket.
Take out the rotisserie carefully out of the oven.
11
