Parkside PBHITM A1 Bedienings- En Veiligheidsinstructies pagina 40
Beschikbare talen
Beschikbare talen
Close the battery compartment cover
10
again and rotate the battery compartment
cover screw
clockwise to tighten it using
9
a suitable screw driver.
Note: No button should be pressed while
inserting the batteries.
Start-up
Before you take a measurement
Ensure that both measuring pins
touch
2
the surface of the material at the same time.
Increase the pressure on the measuring
pins
for rough surfaces if necessary.
2
For delicate surfaces complete the meas-
urement on a section that is not in the visible
area.
The measuring pins
are
WARNING!
2
sharp and may dent or damage the surface.
Rub the damp residue on the surface before
taking the measurement.
Measure several places and take an average
value.
Be aware that salts can increase the con-
ductivity of water. This can lead to incorrect
readings and results that are too high.
Remove the bark from firewood if needed.
Press the measuring pins
against the
2
grain in various places on the wood.
40 GB/IE
