personal injury.
equipment
●To avoid personal injury, please do not modify or weld hydraulic
without approval.
●Please never lift more than the rated capacity of the cylinder.
Overloading causes equipment failure and serious personal injury.
●The cylinder is a load-lifting device,not a load-holding device. After the
load has been raised or lowered,it must always be held mechanically.
Never work under a load supported by a hydraulic unit.
●Keep hands and feet away from the cylinder and workplace during
operation to avoid personal injury.
●Do not put unbalanced or off-center loads on cylinders.The incorrect
load can result in equipment failure and serious personal injury.
WARNING
●Wear safety glasses,helmets, and other necessary personal protective
equipment when operating hydraulic equipment.
●Cylinder used to lift the load must have a solid footing for correct support.
Please select steel or woodblocks that are capable of supporting the load.
●Install Pressure gauges in the system to monitor the operating
pressure.The gauge must have the same pressure rating as the pump and
cylinder. The wrong gauges may result in personal injury.
●The system operating pressure must be lower than the lowest rated
pressure in the system.
●(Carefully inspect the cylinder and couplers before using the cylinder.
Never connect the cylinder with damaged couplers or damaged port
threads.The damaged coupler or damaged port threads may cause
equipment failure and possible personal injury.
- 3 -