Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Pos.
1
2
Only lubricate the instructed components. Other components are lubricated for the
NOTE
design working period of the product.
7.7.4
Lubricant information
1 Hoisting gear
Lubricated with oil. Lubrication lasts for the design working period of the product.
Standard lubricant
Installation
Factory installed
If you must add lubricant for the hoisting gear, see the following table for the correct fill amount.
Frame size
05
10
2 Chain
Lubricated with oil.
• Lubricate the chain carefully before the first run (commissioning).
◦ Apply a substantial amount of lubricant over the full length of the chain
◦ Make sure that the chain is lubricated all over its surface and links, especially on all contact
areas between the chain links.
• To extend the chain lifetime, continue to lubricate the chain within regular intervals.
• Chain lubrication interval varies from a minimum of one week to one year, depending on the
usage.
Standard lubricant
Installation
Lubricate before first run
Dit document en de daarin vervatte informatie vormt het exclusieve eigendom van Verlinde S.A.S. en vertegenwoordigt
een niet openbaar, vertrouwelijk en gepatenteerd handelsgeheim dat niet mag worden vermenigvuldigd, onthuld aan
derden, gewijzigd, of anderszins op enigerlei wijze mag worden toegepast zonder de uitdrukkelijke schriftelijke
toestemming van Verlinde S.A.S. Copyright 2020 © Verlinde S.A.S. Alle rechten voorbehouden.
Component
Hoisting gear
Chain
Trade name and number
Mobil ATF 320
Quantity [l]
Trade name and number
Mobilgear 600 XP 220
Intervals
Lubricated for the design working period
of the product
From 1 week up to a year (depending on
the usage)
Quantity
Lubricated for the design working
period of the product
0.23
0.6
GEBRUIKERSHANDLEIDING
Quantity [pt]
0.49
1.27
Quantity
As required
4/2020
Advertenties
Inhoudsopgave
