Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
JumpArenA
Trampolines
STEP 6
6
Before the Step6: Attach twp piece
pad together by velcro and tie straps
5
Lay the frame Pad (5) on the frame
Adjust the position of the Frame Pad
so that the slits are directly above the
Socket, as shown.
Caution: Do not use the trampo-
line without the Frame Pad (5).
The Frame Pad is designed to
5
reduce the possibility of injuries
Slit
due to jumpers coming in contact
Socket
with the trampoline frame. If you
do not have a Frame Pad, contact
your dealer to obtain one. Prop-
erly install the Frame Pad before
Inner Straps
using the trampoline.
V-ring
Look underneath the trampoline.
Locate the straps attached to the un-
derside of the frame pad. Position
each outer strap so that one strap is
Frame
on each side of the frame as shown.
Tie the outside straps sewn to the
Outer Straps
Pad Joints to each side of the frame
as shown and attach the inner straps
to the near V-rings. Repeat this
step with the remaining straps (not
shown).
Notice: If you purchase the en-
closure please attach the mat and
Frame
the net together before attach-
ing the strap to the frame and
V-rings.
Using the included plastic tie, attach
the warning label (15) to the frame
near the point where jumpers will
15
climb onto and off the trampoline.
18
Advertenties
Inhoudsopgave
