Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fault codes
Below is the explanation of the error codes that may appear on the display. These error codes can only be resolved
by qualified personnel. Contact customer service to have the problem rectified.
FAULT CODE
E0
E1 Temperature sensor detection circuit error of refrigerating chamber
E2
E5
E6
E7
EE
EH
EP
EF
CA
7. TAKING OUT OF SERVICE
Switching off and storage
•
If the appliance will not be used for several months, first switch it off and then pull the plug out of the socket.
•
Make sure the appliance is completely thawed.
•
Clean the inside thoroughly and wipe dry. To prevent the formation of odours and moulds, leave the door open:
block it.
•
Clean the door gasket groove with soap and water and wipe everything dry with a soft cloth.
•
Do not use a hard brush, steel brush, detergent, soap powder, alkaline detergent, benzene, gasoline, acids, hot
water or other corrosive or soluble substances to clean the appliance.
•
Store the cleaned appliance in a dry, ventilated place, away from a heat source. Make sure the appliance is on
a level surface and do not place heavy objects on top.
•
The appliance in storage must not be accessible to children playing.
FAULT DESCRIPTION
Icemaker error
Temperature sensor detection circuit error of freezing chamber
Freezing defrost sensor detection circuit error
Communication fault of main board and Display control panel
Circulation of ambient temperature sensor detection circuit error
Icemaker sensor circuit error
Moisture sensor error
Ice-separating fault of icemaker
Water tank loose error
Communication fault of main board and ice making board
45
Advertenties
Hoofdstukken
Inhoudsopgave
