Setting Menu Entries, General - Fronius Primo 3.5-1 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Primo 3.5-1:
- Bedieningshandleiding (176 pagina's) ,
- Gebruiksaanwijzing (172 pagina's) ,
- Installatiehandleiding (48 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
G R A P H
If no key is pressed for 2 minutes,
-
-
-
Setting menu en-
1
tries, general
2
3
The available settings are displayed:
4
5
The currently selected menu item is dis-
played.
The inverter switches from wherever it is on the menu level back to the 'NOW' display
mode (exception: 'Standby' Setup menu entry),
the display backlighting goes out.
The amount of energy currently being fed in is displayed.
Open the desired menu
Use the 'Up' or 'Down' keys to select the desired menu item
Press "Enter"
Use the 'Up' or 'Down' buttons to se-
lect the desired setting
Press the 'Enter' key to save and ap-
ply the setting.
To discard the setting, press the 'Esc'
key.
To exit a menu entry, press the 'Back'
4
key
The menu level appears
The first digit of a value to be set flash-
es:
Use the 'Up' or 'Down' keys to select
4
a value for the first digit
Press "Enter"
5
The second digit of the value flashes.
Repeat steps 4 and 5 until ...
6
the whole value to be set flashes.
Press "Enter"
7
Repeat steps 4 - 6 as required for
8
units or other values that are to be set
until the appropriate unit or the value
flashes.
Press the 'Enter' key to save and ap-
9
ply the changes.
To discard the changes, press the
'Esc' key.
The currently selected menu item is dis-
played.
25
Advertenties
Hoofdstukken
Inhoudsopgave
