Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Building in
Check that the kitchen furniture and the cut out meet the dimension
and ventilation requirements.
Treat the sawn ends of wooden or synthetic worktops with sealing
varnish if necessary, to prevent moisture causing the worktop to swell.
Lay the hob upside down on the worktop.
Fit the connecting cable to the appliance in line with the relevant
requirements (see page 40).
Remove the protective layer from the sealing tape and apply the tape in
the groove of the aluminium profiles or on the edge of the glass plate.
Do not stick tape round the corners, but cut 4 separate pieces to seal
the corners well.
Turn the hob over and lay it in the recess.
Connect the appliance to the mains. The appliance is now ready for
use.
Check that it works properly. If the appliance has been wrongly
connected either a bleep will sound or nothing will appear in the
displays, depending on the error.
GB 41
Advertenties
Hoofdstukken
Inhoudsopgave
