Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before first use
•
Remove oven accessories and any packaging (cardboard, polystyrene foam) from the oven.
•
Wipe the oven accessories and interior with a damp cloth. Do not use abrasive or aggressive
cloths or cleaners.
•
Heat an empty oven for approximately one hour with the top and bottom heater system at a
temperature of 250 °C. The characteristic "new oven scent" will be released; therefore, ventilate
the room thoroughly during this process.
Switching on for the first time
After connecting your appliance to the power mains or after an extended power outage, 12:00 will
appear on the display.
First, choose and confirm the basic settings.
INFORMATION!
To change them, touch the keys
or
key. The next setting can be adjusted once you have set and confirmed the preceding
one. Touch the
When the selected settings are confirmed, the clock will appear on the display unit (if the operating
system selection KNOB is in position 0).
12
or
key to return to previous setting.
1. CLOCK SETTING
Use the
or
confirm the minutes; then set and confirm the hours. If you press and
hold the value adjustment key, the rate at which the set value is being
changed will increase.
INFORMATION!
To set or adjust the clock later on, see chapter Extra functions.
2. DISPLAY DIMMER
High light intensity is the default setting. The sign brh and the currently
set value for the display light intensity will appear on the display unit.
Touch the
or
value setting keys to increase or decrease light intensity.
3. ACOUSTIC SIGNAL VOLUME
Medium volume is the default setting. The sign Vol and the currently set
value for the acoustic signal volume will appear on the display unit. Touch
the
or
key to select the desired level, and confirm. Acoustic signals
can also be switched off.
. Confirm the desired setting by pressing on the
keys to set the clock (current time). First, set and
key to select the desired level, and confirm. Use the
Advertenties
Hoofdstukken
Inhoudsopgave
