Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
SYMPTOOM
Th e display will keep on
fl ashing after you have
switched on a cooking zone.
A cooking zone suddenly
stops working and a beep can
be heard.
Th e hob is not working and
nothing appears in the display.
A fuse blows as soon as the
hob is switched on.
Th e hob switches off without
warning.
Fault code ER22.
Fault code E2.
Fault code U400
Fault code
.
Other fault codes.
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
Th e pan you are using is
not suitable for induction
cooking. or has a diameter
smaller than 12 cm.
Th e set timer time has passed. Switch off the beep by
Th ere is no power supply due
to a defective cable or a faulty
connection.
Th e hob has been wrongly
connected.
You have accidentally pressed
the on/off button or operated
two buttons simultaneously.
Th e control panel is dirty or
there's water on it.
Th e hob has overheated.
Voltage too high and/or not
connected properly.
You have operated a button
too long.
Defective generator.
GB 24
General
SOLUTION
Use a suitable pan, see (refer
to pages 10 and 11).
pressing any button.
Check the fuses or the electric
switch (if there is no plug).
Check the electrical
connections.
Switch the hob back on.
Cleaning the control panel.
Th e hob has been switched off
due to overheating. Let the
hob cool down and then use
a lower setting.
Have your connection
changed.
Do not operate the buttons
too long.
Contact the service
department.
Advertenties
Hoofdstukken
Inhoudsopgave
