Setting The Speed/Tightening Torque; Changing The Direction Of Rotation; Inserting The Bits; Maintenance And Cleaning - Parkside PDSSA 20-Li A1 Vertaling Van De Originele Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor PDSSA 20-Li A1:
- Vertaling van de originele gebruiksaanwijzing (71 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Setting the speed/tightening torque
♦
Press the ON/OFF switch
speed/tightening torque. Increasing the pressure
increases the speed/tightening torque.
■
The tightening torque depends on the selected
speed and impact duration.
CAUTION!
♦
The tightening torque actually attained must
always be checked with a torque wrench!
NOTE
►
The integrated motor brake ensures rapid
stoppage.
Changing the direction of rotation
♦
Change the direction of rotation by pressing the
rotational direction switch
right.
Inserting the bits
♦
Insert the adapter
tool holder
.
♦
To do this, pull the locking sleeve
and allow the adapter
engage.
│
GB │ IE
■
8
lightly for a low
towards the left or
or bit holder
into the
backwards
or bit holder
to
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
■
The appliance must always be kept clean, dry
and free from oil or grease.
■
Never allow liquids to get into the appliance.
■
Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
PDSSA 20-Li A1
Advertenties
Hoofdstukken
Inhoudsopgave
