Note during transport that:
Where possible, always transport the appliance up-
right. After transportation, only connect to the mains
and turn on after 24 hours so that the refrigerant cir-
cuit can settle after transportation.
Always empty the condensate tank and the conden-
sate drain hose before storage and transportation.
Press the
button to switch on the appliance.
Select the fan mode on the air conditioner or using the remote control. The
operating light is illuminated.
Keep the appliance running in fan mode for a few hours so that it dries com-
pletely from the inside.
Press the
button to switch off the appliance.
Pull the mains plug out of the socket.
Remove the exhaust air hose and window kit.
Remove and clean the filter strainers and allow them to dry out completely.
Insert the filter strainers back into the frames provided for this in the housing.
Remove the batteries from the remote control.
If possible, store the appliance and accessories in the original packaging in a
dark, ventilated, dry and frost-free interior.
Store the appliance in a room without continuously operating heat sources (for
example naked flames, gas appliance or electric heating).
234