Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Turn the filter screens around and rinse the filter
screens under running water. Run the water in
the opposite direction of the air flow through
the filter strainer.
Set the filter screens aside and allow them to air
dry completely.
CAUTION!
Risk of injury!
There is a risk of cuts due to contact with the sharp-
edged evaporator surface when installing the filter
strainers.
Do not touch the sharp-edged evaporator surface
with your bare hands.
Insert the dried filter screens back into the appliance.
. Prolonged non-use, transport and storage
If the appliance is not used for a prolonged period, the appliance must be cleaned
and fully dried.
NOTICE!
Damage to the appliance!
The evaporator inside the appliance must be dried
before storage to prevent damage to components or
mould formation.
Switch off the appliance, remove the mains plug
from the socket.
Empty the condensate tank, clean the appliance as
described under "Cleaning".
Place the appliance in a dry, well-ventilated place for
several days to dry, or use the ventilation operating
mode to dry for a few hours until the condensate dis-
charge is dry.
Fig. 15 – Cleaning the
filter strainers
DE
FR
NL
ES
IT
EN
233
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
