Milwaukee MW150 Gebruiksaanwijzing pagina 23
Ph / orp / temperatuur-bankmeters
MTC mode
To enable Manual Temperature Compensation (MTC), disconnect the temperature probe
from the meter. The display will show a default temperature of 25°C or the last measured
temperature value. The MTC tag and the three arrows symbol next to temperature
measurement will be displayed. Press CAL/EDIT and use the keys to set the
temperature value manually. Press GLP/ACCEPT for the value to be saved (or press ESC or
CAL/EDIT to exit without saving).
"NO T. PROBE" message is displayed. Use the keys to enter calibration mode (third
LCD line is empty). Press CAL/EDIT to start measurement in MTC mode.
Note: If the temperature sensor is broken or disconnected, the meter switches to
MTC mode automatically.
MTC
CAL
MTC
pH
ºC
ACCEPT
pH
CAL
ºC
pH
pH
MTCA
ºC
pH
MTC
ºC
23
Hoofdstukken
Probleemoplossen
