Download Print deze pagina

Cable Winder; Initial Use - SilverCrest 322518 1901 Gebruiksaanwijzing

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 46

Cable winder

A cable winder 5 is arranged on the base 4 of the appliance . This winder 5
allows you to adjust the length of the cable to your local requirements .
CAUTION! PROPERTY DAMAGE!
Always guide the cable through the corresponding recess on the base 4,
which is intended for this purpose, in order to ensure stability .
NOTE
Always wind the power cable around the cable winder 5 in clockwise
direction . This is the only way that you can reduce the length of the cable
to a minimum, allowing you to guide the cable through the recess in the
base 4 (see fig . 1) .
Fig . 1

Initial use

WARNING! RISK OF INJURY!
Always and only use freshly drawn mains water in the kettle! Do not
consume any water that is not certified as potable . If you do, you are
taking a risk with your health!
Before starting the appliance up, make certain that ...
the appliance, plug and power cable are in a serviceable
condition and ...
all packaging materials have been removed from the appliance .
1) Open the lid by pressing on the release button 1 .
2) Fill the appliance with water up to the MAX mark and let it come to a full
boil once – as described in the next section .
3) After it has boiled, pour this water away .
4) Rinse the kettle out with clear water .
SWKT 2400 A1
GB │ IE
 21

Advertenties

Probleemoplossen

loading

Deze handleiding is ook geschikt voor:

Swkt 2400 a1