are not covered by the warranty:
- in staff kitchen areas in shops, offices and other professional
environments,
- in farm hostels,
- by guests in hotels, motels and other residential
environments,
- in bed and breakfast type environments.
HOW TO USE YOUR 4 SLICE TOASTER
1. Make sure that the 2 crumb trays are always in place in the base of the toaster as they also protect the
surface it is standing on from the heat of the elements in the toasting slots.
2. Insert the plug into the mains electrical supply and switch on at the socket.
3. Place the bread to be toasted in the wide toasting slots.
4. Turn the browning control to the required setting. The browning control sets the time that the toaster
will operate. '1' is for light toasting and '7' is for the darkest toast.
5. Push the pop-up lever down until it clicks into position.
6. The bread will be lowered and centred as the lever moves down. The 'Stop' button will illuminate
red while the toaster is in use.
7. Once the selected toasting cycle is complete the pap-up lever will release, automatically lifting the
toast. The 'Stop' button light will go out.
8. To lift the toast further out of the slot, lift the pop-up lever to the highest position.
NOTE:
•
Since the toast will be hot, use caution when removing it from the toaster.
•
The toaster surface will get hot during use, especially near the toasting slots, so always allow the
appliance to cool down before touching it.
•
The two crumb trays have a 'press-to-release' system. Press to release and slide out the crumb trays;