Sennheiser evolution wireless Series Gebruiksaanwijzing pagina 65
Inhoudsopgave
All manuals and user guides at all-guides.com
Inserting and changing the battery
Slide the cover of the battery compartment
arrow until it clicks audibly and open the cover.
Insert the 9 V PP3 battery (IEC 6 LR 61). Please observe correct polarity
when inserting the battery.
Close the battery compartment.
Plugging the transmitter onto the microphone
Plug the transmitter's XLR-3 connector
XLR-3 socket.
Tighten the locking ring
Note:
The transmitter uses the microphone body as an antenna – therefore
only microphones with a metal casing should be used for best signal
transmission.
Switching the transmitter on/off
Press the
ON/OFF
LED
lights up.
For phantom powered condenser microphones:
on the phantom powering (P 48) (u "6 Operation").
For dynamic microphones:
powering (P 48) (u "6 Operation"). With the phantom powering
switched on, the operating time of the battery will be reduced to
approx. 5 hours.
To switch the transmitter off, press the
appears on the display. You can then release the button. The red LED
goes off.
Note:
Switch the plug-on transmitter off before changing the microphone.
Muting the transmitter
Use the
MUTE
switch
(this switch does not switch off the transmitter).
onto the microphone's
.
button
to switch the transmitter on. The red
Via the menu, switch off the phantom
ON/OFF
to noiselessly mute the transmitter's audio signal
in the direction of the
Via the menu, switch
button until "OFF"
65
Hoofdstukken
Inhoudsopgave
