Download Inhoudsopgave Inhoud Print deze pagina

System Management - Dell Inspiron 3030 Handleiding

Verberg thumbnails Zie ook voor Inspiron 3030:
Inhoudsopgave

Advertenties

Table 34. System setup options—System Management menu (continued)

System Management

Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Auto On Time
Table 35. System setup options—Keyboard menu 
Keyboard
Fn Lock Options
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on Battery
Device Configuration HotKey Access
Table 36. System setup options—Pre-boot Behavior menu 
Pre-boot Behavior
Warnings and Errors
Warnings and Errors
92
BIOS-instellingen
Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE:
Once set in BIOS, the Asset Tag cannot be changed.
Enables or disables the computer to turn on and go to boot when AC power is supplied
to the computer.
By default, the Wake on AC option is disabled.
Enables or disables the computer to turn on by a special LAN signal.
By default, the Wake on LAN option is disabled.
Enable to set the computer to turn on automatically every day or on a preselected date
and time. This option can be configured only if the Auto On Time is set to Everyday,
Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Enables or disables the Fn Lock option.
By default, the Fn Lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the F1-F12
keys scan the code for their secondary functions.
Configures the operating mode of the keyboard illumination feature.
By default, the Bright option is selected. Enables the keyboard illumination feature at
100% brightness level.
Sets the timeout value for the keyboard backlight when an AC adapter is connected to
the computer.
By default, the 10 seconds option is selected.
Sets the timeout value for the keyboard backlight when the computer is running only
on the battery power. The keyboard backlight timeout value is only effective when the
backlight is enabled.
By default, the 10 seconds option is selected.
Allows you to control whether you can access device configuration screens through
hotkeys during computer startup.
By default, the Device Configuration HotKey Access option is enabled.
NOTE:
This setting controls only the Intel RAID (CTRL+I), MEBX (CTRL+P), and
LSI RAID (CTRL+C) Option ROMs. Other preboot Option ROMs, which support
entry using a key sequence, are not affected by this setting.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input when
warnings or errors are detected.

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

D32mD32m004

Inhoudsopgave