Inhoudsopgave
Advertenties
Table 37. System setup options—Virtualization menu (continued)
Virtualization Support
Table 38. System setup options—Performance menu
Performance
Multi-Core Support
Multiple Atom Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-State Control
Enable C-State Control
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
Dynamic Tuning: Machine Learning
Enable Dynamic Tuning: Machine Learning
Table 39. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear BIOS Event Log
Thermal Event Log
Clear Thermal Event Log
94
BIOS-instellingen
By default, the Enable OS Kernel DMA Support option is enabled.
NOTE:
This option is provided only for compatibility purposes, since some older
hardware is not DMA capable.
Enables to change the number of Atom cores available to the operating system. The
default value is set to the maximum number of cores.
By default, the All Cores option is selected.
Enables the computer to dynamically adjust processor voltage and core frequency,
decreasing average power consumption and heat production.
By default, the Enable Intel SpeedStep Technology option is enabled.
Enables or disables the ability of the CPU to enter and exit low-power state. When
disabled, it disables all C-states. When enabled, it enables all C-states that the chipset or
platform allows.
By default, the Enable C-State Control option is enabled.
Enables the Intel TurboBoost mode of the processor. When enabled, the Intel
TurboBoost driver increases the performance of the CPU or graphics processor.
By default, the Enable Intel Turbo Boost Technology option is enabled.
Enables the Intel Hyper-Threading mode of the processor. When enabled, the Intel
Hyper-Threading increases the efficiency of the processor resources when multiple
threads run on each core.
By default, the Intel Hyper-Threading Technology option is enabled.
Enables or disables operating system capability to enhance power tuning capabilities
depending on the detected workloads.
NOTE:
This option is available for development only and is not customer visible.
By default, the Enable Dynamic Tuning: Machine Learning option is enabled.
Allows you to select option to keep or clear BIOS events logs.
By default, the Keep Log option is selected.
Allows you to select option to keep or clear Thermal events logs.
By default, the Keep Log option is selected.
Advertenties
Inhoudsopgave
