Safety Instructions; Follow The Instructions Below - Lund 67200 Originele Instructies
Inhoudsopgave
Beschikbare talen
Beschikbare talen
EN
PRODUCT OVERVIEW
The steam cleaner is designed for cleaning smooth surfaces with a hot steam jet. Particularly useful in bathrooms, toilets, kitch-
ens, as well as for cleaning windows and mirrors. The product is intended for domestic applications only, and not for any commer-
cial use. The correct, reliable, and safe operation of the device depends on its proper use, so:
Read and keep the entire manual before the fi rst use of the product.
The supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
specifi ed in this manual. Use of the product for purposes other than those for which it was intended shall cause the loss of the
user's rights to the guarantee and under warranty.
ACCESSORIES
The product is delivered complete, but requires carrying out a number of preliminary actions described in further sections of the
manual, before starting operation. The product comes with nozzles of various shapes and purpose, as well as a measuring cup,
funnel and a cloth pad for cleaning large surfaces.
SAFETY INSTRUCTIONS
Caution! Read all of the following instructions. Failure to do so may result in electric shock,
fi re, or personal injury.
FOLLOW THE INSTRUCTIONS BELOW
Do not use the product in an explosive environment containing fl ammable liquids, gases,
or vapours. Before starting the product for the fi rst time, make sure that the product, its
accessories, and the power cord have not been damaged. If any damage is discovered, it
is not allowed to start working with the product. Any damaged components, including the
power cord, must be replaced at an authorized facility. It is not allowed to repair the product
on your own. The product is intended for indoor use only. Do not expose the product to any
precipitation or moisture. If water and moisture enters the product, the risk of an electric
shock is signifi cantly increased. Do not immerse the product in water or any other liquid.
Connect the product to the power network providing the voltages and frequencies indicat-
ed on the nameplate of the unit, exclusively. The plug of the power cord must match the
power socket. Do not modify the plug. Do not use any power adapters to adapt the plug to
the socket. An unmodifi ed plug, which matches the socket, reduces the risk of an electric
shock.A product with fi rst class electrical insulation must always be connected to an outlet
equipped with a protective conductor. The mains power supply should be equipped with a
residual current fuse with a tripping current of 30 mA or less. After each application, unplug
the power cord from the power socket. Always disconnect the device from the power supply,
if it is left unattended, and before putting it away, disassembling, or cleaning.Do not leave
the device connected to the power supply unattended. Do not overload the power cord. Do
not use the power cord to carry the product, connect, or disconnect the plug from the power
socket. Avoid any contact between the power cord and heat sources, oil, sharp edges, and
moving parts. Damage to the power cord increases the risk of an electric shock. If the power
cord is damaged (e.g. it is cut, its insulation is melted), immediately unplug it from the wall
socket, and return it to an authorised service facility. It is not allowed to use the product with a
damaged power cord. It is not allowed to have the power cord repaired. It must be changed
O R I G I N A L
I N S T R U C T I O N S
10
Inhoudsopgave
