Abus FU8380 Handleiding pagina 20
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Jumper A
Sensitivity:
The detector can be set to high
or low sensitivity using jumper A.
The sensitivity can be fine-tuned
in the corresponding setting
range using the potentiometer
(see below).
Jumper B Multiple-vibration mode:
When the multiple-vibration mode
is activated, the vibration detector
only sends an alarm after
repeated vibrations.
Jumper C Calibration:
Use this jumper to set the
detector to calibration mode or
normal operation.
Jumper D LED:
Use this jumper to deactivate/
activate the LED on the detector.
Low
High
Off
On
Calibrate detector
Normal
Off
20
