Scheppach CSE2600 Vertaling Van De Originele Gebruiksaanwijzing pagina 38
Beschikbare talen
Beschikbare talen
14. Troubleshooting
Fault
Possible cause
No electricity
Motor does not run
Chain brake
Running out of carbon brush
Chain does not move
Chain brake
Blunt chain
Poor cutting perfor-
Chain tension
mance
Check that the chain is fitted correctly
Saw works only with
difficulty Chain jumps
Chain tension
off sword
Chain becomes hot
Chain lubrication
38 | GB
Remedy
Check socket, cable and plug.
Damaged cable: Have repaired by Customer Ser-
vice. It is prohibited to patch the cable with insulating
tape. Damaged switches have to be replaced by a
Customer Service workshop
See section "chain brake" and "Releasing the chain
brake"
Change the carbon brush, ask a Customer Service
workshop
Check the chain brake, release if necessary.
Sharpen the chain
Chain wrongly fitted
Check the chain tension
Check the chain tension
Check oil level
Check Chain lubrication
www.scheppach.com
