activate the manual roasting function, press this knob. This setting can be changed after
the roasting process has started.
4. At this point, the countdown will start. The display will show the corresponding roasting
level and the fan power level display will show "8", indicating that the fan is operating at
maximum power.
5. During the roasting process, you can change the time setting by turning the corresponding
knob. The selected roasting level and fan power setting will be shown on the display.
6. Pressing the power button while the appliance is roasting will activate the cooling function.
At this point, the display will show "06:00" and the countdown will begin. The roasting level
value and
will switch off.
If you want to switch off the appliance while this function is enabled, press and hold the
power button for 3 seconds.
7. When the roasting or cooling process is finished, the display will switch off and the
appliance will enter standby mode.
8. Each time you press any button or knob, a beep will sound. When the coffee beans are
ready, the roaster will beep several times for 15 seconds.
Automatic roasting function
1. Press the power button to turn the appliance on. By default, when the display is turned
on, "08:00" will be shown on the roasting time display, indicating that the preset time is 8
minutes. In addition, the roasting level will be 6 and the fan power level will be 8. At this
time,
and
2. Press the Roasting level adjustment knob/Automatic roasting function button. The
appliance will start up and the countdown will start. The roasting time that will be shown
on the display is "10:00".
roasting level will be 6.
3. The automatic roasting function allows you to adjust the time (each time you turn the
corresponding knob, the time will increase or decrease by 10 seconds). The roasting level
and fan power level cannot be adjusted while this function is activated.
4. From this point on, follow steps 4-7 of the Manual roasting section.
Operating instructions
1. Place the coffee beans in the roasting container as shown in figure 3.
Note: do not add more than 100 grams of coffee beans.
2. Place the skin container in the roasting container and then turn it until it locks into place
as shown in figure 4.
3. Place the metal part and the cover on the skin container, making sure that they fit tightly
as shown in figure 5.
4. Next, place the roasting container in the base and then turn it until it locks into place as
shown in figure 6.
5. Follow the steps under the Manual roasting or Automatic roasting function sections
according to your preference.
shall light up, while
will light up and the fan power level will be displayed.
will flash.
shall light up, while
shall switch off.
shall switch off. By default, the
ENGLISH
ROASTER BOOSTER
39