cecotec ROASTER BOOSTER Handleiding pagina 41
Koffiebrander
Beschikbare talen
Beschikbare talen
2. Ensure that all components are in good condition and properly assembled.
3. Check that wiring and electrical connections are in good condition and secure.
General maintenance
-
Carry out regular checks to ensure that there is no build-up of debris and that everything
is working properly.
-
Oils from coffee can build up over time, so regular cleaning is key to avoid performance
problems.
-
Always refer to the instruction manual provided for specific cleaning and maintenance
instructions.
5. TROUBLESHOOTING
Problem
The appliance does
not switch on
Coffee is not
roasted evenly
Excessive smoke
during roasting
Possible cause
Roaster is not plugged
in.
Button in wrong
position.
Internal electrical
problem.
Overloading of the
roasting container.
Uneven distribution of
beans.
Waste in the container.
Accumulation of oils and
waste.
Beans with too much
skin.
Too many beans.
Possible solution
Make sure the appliance is plugged in
correctly.
Check that the button is in the on
position.
Contact the official Cecotec Technical
Support Service.
Do not overload the container, follow
the recommendations given in this
instruction manual.
Make sure the beans are well distributed
before starting.
Clean the container before each use.
Perform a thorough cleaning of the
roasting container and heating area.
Be sure to remove the skin regularly from
the appropriate container.
Reduce the amount of beans in each
roasting cycle.
ENGLISH
ROASTER BOOSTER
41
