Download Print deze pagina

AEG LF6284M Gebruiksaanwijzing pagina 50

Verberg thumbnails Zie ook voor LF6284M:
Beschikbare talen

Beschikbare talen

operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Tijd besparen and
Startuitstel buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Aan/Uit button for a few
seconds to activate the appliance.
A short tune sounds (if activated).
10.2 Loading the laundry
• Open the appliance door.
• Shake the items before you put them in
the appliance.
• Put the laundry in the drum, one item at a
time.
Make sure not to put too much laundry in the
drum.
50
ENGLISH
9.5 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the
Synthetica programme (3rd position
clockwise).
3. Press and hold the Tijd besparen and
Startuitstel buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. The display will show
seconds.
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
• Close the door firmly.
for about 5
loading