AEG LF6284M Gebruiksaanwijzing pagina 53
Beschikbare talen
Beschikbare talen
2. Change the options. The given information
in the display changes accordingly.
3. Touch the Start/Pauze again. The washing
programme continues.
Cancelling a running programme
1. Press the button Aan/Uit button to cancel
the programme and to deactivate the
appliance
2. Now, you can set a new washing
programme. Press again to activate the
appliance.
Opening the door - adding garments
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the Start/Pauze button
2. Open the appliance door. If necessary, add
or remove the items.
3. Close the door and touch the Start/Pauze
again. The programme or the delay start
continues.
End of the programme
1. The appliance stops automatically. The
acoustic signals operate (if they are active).
2. The indicator of the Start/Pauze button
goes off. The door unlocks and the indicator
goes off .
11. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
11.1 Periodic cleaning schedule
Periodic cleaning helps to extend the life
of your appliance.
After each cycle, keep the door and the
detergent dispenser slightly open to get air
circulation and dry the humidity inside the
appliance: this will prevent mildew and
odours.
If the appliance is not used for a long time:
close the water tap and unplug the appliance.
Indicative periodic cleaning schedule:
Descaling
Twice a year
3. Press the Aan/Uit button to deactivate the
appliance. Keep the door and the detergent
dispenser slightly ajar to prevent mildew and
odours.
Draining water out after end of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse you must remember to drain the water
to open the door.
1. Touch button Start/Pauze.
• If you have set
the water and spins.
• If you have set
drains the water.
2. Touch button Centrifugeren to decrease
the spin speed proposed by the appliance
When the programme is completed and the
door locked indicator
open the door.
3. Press the Aan/Uit to deactivate the
appliance.
Stand-by function
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption.
Maintenance wash
Clean door seal
Clean drum
Clean detergent dispens‐
er
Clean drain pump filter
Clean the inlet hose and
the valve filter
The following paragraphs explain how you
should clean each part.
, the appliance drains
, the appliance only
goes off, you can
Once a month
Every two months
Every two months
Every two months
Twice a year
Twice a year
ENGLISH
53
