Download Inhoudsopgave Inhoud Print deze pagina

Atag VA4110MT Gebruiksaanwijzing pagina 44

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

44
Using the detergent
A
C
CAUTION! Only use detergent
designed specifically for
dishwashers.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A). You can use detergent in tablets,
powder or gel.
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
How to select and start a
programme
1. Press the button dedicated to the
programme you want to set.
• The light related to the button is on.
• The display shows the programme
duration.
2. Activate applicable options if desired.
3. Close the appliance door to start the
programme.
How to select and start the
programme
1. To select
, press and hold
seconds.
• The light related to the button is on.
• The display shows the programme
duration.
2. Close the appliance door to start the
programme.
B
for 3
How to activate options
1. Select a programme.
2. Press the button dedicated to the
option you want to activate.
• The light related to the button is on.
• The display shows the updated
programme duration.
By default, options must be
activated every time before you
start a programme.
If the latest programme
selection is enabled, the saved
options are activated
automatically along with the
programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other.
Activating options often
increases the water and energy
consumption as well as the
programme duration.
How to select and start the
programme
1. Press
• The light related to the button is on.
• The display shows the programme
duration.
Options are not applicable to
this programme.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times
and the initial programme duration can
decrease.
How to delay the start of a
programme
1. Select a programme.
.

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave