• Change the time remaining before cleaning the hood filter
Action
Activate the hob
Select the hood
Change the counter time
Confirm the setting
Cleaning the grease filter in the dishwasher
The grease filter has to be placed vertically in the lower basket and washed at 60 ° C maximum with
a mild detergent.
After cleaning, replace the grease filters in the hood.
Replacement of the activated carbon filter
The active carbon filter used for the recirculation and to catch the smells, must be replaced after 6
months of normal use.
Grease filter
CLEANING AND MAINTENANCE OF THE HOB
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot because they are risk of burn.
• Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then
rinse with cold water and dry the surface thoroughly.
• Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches
must be absolutely avoided.
• Do not ever use any steam-cleaner or pressure washer
• Do not use any object that may scratch the ceramic glass.
• Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your
ceramic hob or on the pan. Sliding rough saucepans will scratch the surface.
• Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the
surface being damaged.
Control panel
Press key [
] for 2 sec.
Press on the hood selection key
Press on the timer key for 3 sec.
adjust to press on the key [ + ] or [ - ]
Press on the timer key again
65
Display
[ 0 ] and a dot flashes on
the hood selection key
[remaining time] on the
timer display
[remaining time] on the
timer display
-
Activated carbon filter