Technical specifications
Battery technology
Capacity
UN classification
Power supply
Battery output voltage
Power supply unit output
current (rated)
Battery output current (rated)
Standby current
Protection
Dimensions (L x W x H)
Battery weight
System weight
Minimum life cycle
Operating conditions
Charging
Discharging
Transport/storage conditions
Operating/storage air pressure
Recharge time
Electromagnetic compatibility
IEC 60601-1 classification
Battery run time
1
Using 15 cm H
O (IPAP), 5 cm H
2
heated humidification and heated tubing.
Note: The manufacturer reserves the right to change these specifications without
notice.
6
Lithium ion
< 100 Wh (97 Wh)
UN3481 (lithium-ion batteries packed with equipment)
Input range 100–240V, 50–60Hz, 1.0-1.5A
Nominal for aircraft use 110V, 400Hz
(24V / 26V) ± 0.5V, 90W continuous
3.75 A
3.75 A / 3.46 A
< 100 μA
Overcharge, overdischarge, excess current, short circuit,
high temperature
230 mm x 126 mm x 26 mm
0.9 kg
2.3 kg
≥ 500 cycles at 23°C to 60% capacity
5°C to 40°C; 5–85% maximum humidity
-5°C to 40°C; 5–85% maximum humidity
-20°C to +45°C; 5–85% maximum humidity
600 hPa to 1100 hPa
< 4 hrs at full level
Product complies with all applicable electromagnetic
compatibility requirements (EMC) according to IEC60601-
1-2, for residential, commercial, and light industry
environments. Information regarding the electromagnetic
emissions and immunity of these ResMed devices can
be found on www.resmed.com, on the Products page
under Service and Support. Click on the PDF file for your
language.
Class II (double insulation) and/or Internally Powered
Equipment, IPX1 (IPX0 while charging), Continuous
Operation (from mains), Limited Operation (from
battery), Equipment not suitable for use in the presence
of a flammable anaesthetic mixture with air or with
oxygen or nitrous oxide.
> 8 hrs at average device settings
For more information, see the Battery/Device
Compatibility List on www.resmed.com.
O (EPAP), and 15 BPM (Respiratory Rate). Not applicable to devices when using
2
1