Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Symbols
The following symbols may appear on the device or packaging:
Attention, consult accompanying documents;
Drip proof;
0
Lot number;
Temperature limitation (storage and transport);
level;
Audible alert mute;
package is damaged;
Disposal of the battery and the power supply unit should be carried out in accordance with
applicable national laws and regulations. WEEE 2002/96/EC is a European Directive that
requires the proper disposal of electrical and electronic equipment. The battery and power
supply unit should be disposed of separately, not as unsorted municipal waste. To dispose
of your battery and power supply unit, you should use appropriate collection, reuse and
recycling systems available in your region. The use of these collection, reuse and recycling
systems is designed to reduce pressure on natural resources and prevent hazardous
substances from damaging the environment. European Directive 2006/66/EC requires the
proper disposal of spent batteries and accumulators. The battery may only be returned to
collection points fully discharged. If charged or partially discharged, care should be taken to
prevent short circuiting. Batteries containing more than 0.0005% of mercury by mass, more
than 0.002% of cadmium by mass or more than 0.004% of lead by mass are marked below
the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for which the
limit is exceeded.
If you need information on these disposal systems, please contact your local waste
administration. The crossed-bin symbol invites you to use these disposal systems. If you
require information on collection and disposal of your ResMed device please contact your
ResMed office, local distributor or go to www.resmed.com/environment.
General warnings and cautions
WARNINGS
•
Lithium ion batteries have built-in safety protection circuits, but can still be
dangerous if they are not used correctly. Damaged batteries can become
inoperative or catch fire.
•
Due to risk of fire or electric shock:
-
do not place the RPS II near open fire or heaters.
-
do not expose the RPS II to direct sunlight or heat (for example behind a
car window).
-
do not expose the RPS II to water, rain or high moisture levels.
-
do not short-circuit the RPS II.
-
do not use a damaged RPS II.
-
do not open the RPS II or the AC charger.
•
Make sure to revert to AC power when the remaining capacity of RPS II and/or
device internal battery is low.
•
Make sure to periodically recharge the battery due to effects of self-
discharging.
No protection;
Class II equipment;
Serial number;
DC input/output;
Manufacturer;
Read instructions before use;
8
Part number;
Charging;
O I
DC on/off;
Environmental Information.
European RoHS;
Maximum humidity;
Battery charge
Do not use if
English 7
Advertenties
Inhoudsopgave
