Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DIRECTIONS FOR USE - QUICK RELEASE BUCKLE
The Quick Release Buckle retention system, which is equipping your hel-
met, requires a personalized pre-adjustment.
CAREFULLY READ THE INSTRUCTIONS CONTAINED IN THIS LABEL.
1) Put your helmet on, making sure the size is correct (see enclosed
instructions manual).
2) Fix the closure by inserting the tongue in the mechanism until you feel
the closing click (Fig. 1).
3) Pull the free part of the strap until you feel it press against your cheek (Fig. 2).
4) Now, try to take off your helmet by pulling it from the back edge, rotating
it towards the front. The helmet must remain well fixed on your head.
(See enclosed instructions manual).
IF NOT, YOU HAVE TO VERIFY ALL THE ABOVE MENTIONED OPER-
ATIONS.
WARNING! LIFT THE RED LEVER ONLY WHEN YOU ARE REMOVING
YOUR HELMET! NEVER RELEASE THE LEVER WHILE DRIVING.
CARE OF "QUICK RELEASE BUCKLE"
The effectiveness of the adjustment and retention system can be impaired
by dust or sand.
We suggest periodic cleaning of the "Quick release buckle" retention sys-
tem using only a solution of lukewarm water and neutral soap.
USE NO SOLVENT DO NOT LUBRICATE.
Manipulations or unusual events, which can compromise the working of the
retention system cannot be excluded. If the "Quick release buckle" system
is not functioning properly discontinue the use of the helmet.
4
GB
Advertenties
Inhoudsopgave
