4.5F MANUAL HUMIDIFICATION
Manual humidification can be activated while cooking by
pressing button H. The valve that injects steam in the cooking
chamber is activated only when button H is pressed.
It is possible to change the parameters during the cooking in order to
adapt it to the food.
4.5G GRILL
Grill is activated by pressing button G.
4.6A AUTOMATIC COOKING PROGRAMS
You can store up to 99 programs, from P01 – to P99. There
can be 1 or 3 phases for each program (depending from oven
model).
For each phase can be set:
- temperature
- time
- humidification
The oven is supplied with preset but not configured programs.
To search a program, select the programs list (not during a cooking) with button P (pressing it slightly).
The led next to button P is flashing, the upper display is turned off and the lower shows the name of the pro-
gram (P01...P99). Using the buttons with arrows you can go up and down the list. To confirm the chosen pro-
gram, press again button P. The display shows the standard screen, the led next to button P is on and the lower
display shows the number of the selected program. The cooking parameters of each phase can be changed.
Pressing Start, the preheating of the selected program starts.
4.6B STORING A PROGRAM
To store a program after selecting and modifying it, press
button P for 5 seconds with the number of the program shown
on the display.
The storing is confirmed by program leds flashing for some seconds. If the
display shows phases settings, you need to press P to change view and
then again for 5 seconds to store the program.
4.6C DELETING A PROGRAM
To delete a program when it is shown in the programs list, press for long
and simultaneously buttons F and D.
The deleted program becomes empty (not written) and it is stored.
4.6B QUITTING AUTOMATIC PROGRAMS
To go back to manual cooking, press ON/OFF.
4.7 SWITCHING OFF THE OVEN
To switch off the oven, press ON/OFF for some seconds (until the display turns off).
All manuals and user guides at all-guides.com
11
EN