1
4
0/OFF = Off
1 Operating with cold water
2 Operating with hot water
3 Eco setting (hot water max. 60 °C)
4 Operating with steam
Set appliance switch to desired operat-
ing mode.
Indicator lamp for operational readiness
lights up.
The device starts briefly and turns off, as
soon as the working pressure is reached.
If the control lamp rotation direction
lights up, please switch the appliance off
immediately and fix the error, see Help
with malfunctions .
Release the trigger gun. To do so, push
the safety catch towards the back.
When activating the hand spray gun the de-
vice switches back on.
If no water comes out of the high
pressure nozzle, vent pump. Refer to Help
with malfunctions - appliance is not building
up pressure .
Set device switch to desired tempera-
ture.
30
98
– Clean with hot water.
100
150
– Clean using steam.
Replace the high-pressure nozzle
(stainless steel) with steam nozzle
(brass), (refer to Using steam ).
2
3
Turn the regulation spindle in a clock-
wise direction: Increase working pres-
sure (MAX).
Turn the regulation spindle in an anti-
clockwise direction: Reduce working
pressure (MIN).
Set device switch to max. 98 °C.
Set the working pressure/ uantity regu-
lation at the pump unit to maximum
uantity.
Set the working pressure and feed
uantity by turning (steplessly) the
pressure/ uantity regulation mecha-
nism at the hand spray gun (+/-).
DANGER
Risk of injury! When adjusting the pressure/
quantity regulation, make sure that the
screw connection of the spray lance does
not become loose.
For long term work with low pres-
sure, set pressure at the pressure/ uantity
regulation of the pump unit.
– For considerate treatment of the envi-
ronment use detergent economically.
– The detergent must be suitable for the
surface to be cleaned.
With support of the detergent dose
valve set detergent concentration as
determined by the manufacturer.
Recommended values at the control
panel at maximum working pressure.
If detergent is be suctioned from an
external container, route the detergent suc-
tion hose through the recess to the outside.
EN
7
31