Download Print deze pagina

Kärcher HDS 6/10 C Originele Gebruiksaanwijzing pagina 32

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 80
Set pressure/temperature and deter-
gent concentration according to the sur-
face to be cleaned.
To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.
– Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
– Remove the dirt:
Spray off loosened dirt with the high
pressure jet.
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
Set operating pressure according to
need.
The appliance works in the most economi-
cal temperature range (max. 60°C).
We recommend the following cleaning tem-
peratures:
– Light contaminations
30 50
– Contaminations containing protein, i.e.
in the food processing industry
60
– Vehicle cleaning, machine cleaning
60 90
– De-preserve, contaminations contain-
ing strong fat contents
100 110
– De-frosting of surcharge substances,
partially facade cleaning
140
32
DANGER
Scalding danger!
Set device switch to desired tempera-
ture.
DANGER
Scalding danger! The work pressure must
not exceed 3.2 MPa (32 bar) when operat-
ing with temperatures above 98 °C.
Therefore the following measures must
definitely be performed:
Open up the pressure/ uantity regula-
tor on the hand spray gun completely,
direction + until stop.
Set the working pressure/ uantity regu-
lation at the pump unit to the minimum
uantity.
Set device switch to min. 100 °C.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Set dosing value for detergent to 0 .
Set the appliance switch to 1 (opera-
tion with cold water).
Open the hand spray gun and rinse the
appliance for at least 1 minute.
DANGER
Danger of scalding from hot water! After the
operation with hot water or steam, the de-
vice must be operated with opened gun
with cold water for at least two minutes.
Shut off water supply.
Open the hand spray gun.
Switch on the pump with the power
switch and allow to run for about 5-10
seconds.
Close the hand spray gun.
Set the appliance switch to 0/OFF".
EN
8

Advertenties

loading