Connecting To A Usb Power Supply; Use; Switching On And Off, Operation - Ultimate Speed Smx-Ms31-01 Bedienings- En Veiligheidsinstructies
Ultrasone marterverjager met flitslicht
Inhoudsopgave
Connecting to a USB power supply
When using a USB cable, connect 4 the USB A connector K to the corre-
sponding socket of the USB power supply.
Connect the barrel connector J to the power socket E of the marten
repellent.
Connect the USB power supply to the mains. Make sure that the specifications
on the USB power supply correspond to the characteristics of your mains
supply.
The ultrasonic marten repellent is now ready to use.
4. Use
Switching on and off, operation
Press the on / off switch A on the marten repellent to position "I" to switch the
device on.
You will first hear a shrill sound for around two seconds. The operating cycles will
then begin as follows:
1. 10 seconds ON: white flashing lights, crackling sounds and ultrasound
18-36 kHz; the indicator light B flashes red
2. 100 second pause: the indicator light B flashes green
The operating cycles will be repeated until the marten repellent is switched off or
until a movement or vibration is detected.
17
GB
Hoofdstukken
Inhoudsopgave
