Troubleshooting - Aeg Dka9971B Gebruiksaanwijzing
Inhoudsopgave
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
You cannot activate the appliance.
You cannot activate the appliance.
The lamp does not operate.
The brightness level or light colour
temperature is not as described in
the instructions.
The appliance does not absorb
enough vapours.
The
indicator blinks red rapidly
three times, and the AutoSense
function does not start.
The
indicator blinks red rapidly
for three seconds, and the Auto‐
Sense function does not start.
Possible cause
The appliance is not connec‐
ted to a power supply or it is
connected incorrectly.
Lack of electrical power sup‐
ply.
The lamp is defective.
Incorrect Perfect illumination
setting.
The lamp is defective.
The motor speed is not ade‐
quate to the appearing va‐
pours.
The function is permanently
deactivated.
There is a malfunction.
97
Remedy
Check if the appliance is correctly connec‐
ted to the electrical supply.
Check the fuse or the main switch. If the
fuse or the switch continue to break the cir‐
cuit, contact a qualified electrician.
Contact an Authorised Service Centre.
Touch the
symbol to check if you are
able to change all three colour tempera‐
tures.
Contact an Authorised Service Centre.
Increase the speed of the motor.
Activate the function. Refer to the Auto‐
Sense in "Daily use" chapter.
Contact an Authorised Service Centre.
Hoofdstukken
Inhoudsopgave
Probleemoplossen
