THOMSON TDW4510WH2 Handleiding pagina 103
Beschikbare talen
Beschikbare talen
Filling the rinse aid dispenser
Remove the rinse aid dispenser cap by
lifting up the tab.
Close the cap.
NOTE: Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next
wash.
Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps:
1. Close the door and switch on the dishwasher.
2. Within 60 seconds after powering on the dishwasher, press and hold
then
press
to enter the setting mode.
The display will show d3.
3. Repeatedly press
4. The setting will be confirmed if there is no operation
in about 5 seconds.
to select the proper setting.
EN-14
Pour the rinse aid into the dispenser,
being careful not to overfill.
for about 5 seconds and
Display
d1
d2
d3
d4
d5
Amount of
rinse aid (mL)
1,2
2,4
3,6
4,8
6,0
