THOMSON TDW4510WH2 Handleiding pagina 95
Beschikbare talen
Beschikbare talen
11
Display
12
Status indicator lights
13
half load indicator light
14
Auto open indicator light
BEFORE INSTALLING YOUR DISHWASHER
Before connecting your dishwasher to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. The appliance must be grounded. The
manufacturer is not responsible for damages that may occur as a result of usage without grounding.
WARNING: Disconnect electrical power before installing your dishwasher.
INSTALLATION INSTRUCTIONS
Positioning The Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the
sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain
hoses that can be positioned either to the right or the left sides to facilitate proper installation.
Extra Drying
To dry dishes more completely (It can only be used with ECO, Hygiene, Glass
and 90 min programs. )
Power wash
To wash very dirty, hard to clean dishes. ( It can only be used with ECO,
Hygiene, Glass and 90 min programs. )
To show the remaining time, delayed start time, water hardness and error
codes.
To show the degree of water consumption
To show the degree of energy consumption
Child lock
Rinse Aid
If this indicator light illuminates, it means the dishwasher is low on dishwasher
rinse aid and requires a refill.
Salt
If this indicator light illuminates, it means the dishwasher is low on dishwasher
salt and needs to be refilled.
Water Faucet
If this indicator light illuminates, it means the water facuet closed.
EN-6
