THOMSON TDW4510WH2 Handleiding pagina 108
Beschikbare talen
Beschikbare talen
Changing the program in progress
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may
have already been released and the dishwasher may have already drained the wash water. If this is the
case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1. Press
to pause.
2. Press and hold
3. Repeateldy press
4. Press
to start the new program.
Child lock function
The child lock function of your dishwasher prevents accidental program changes and stops children
playing with the controls while the appliance is running.
To activate the function, press and hold
lock indicator light
To deactivate the function, press and hold
the lock indicator light
USAGE COUNTER
When the power cord is connected, but the dishwasher is not turned on, press and hold
seconds, the dishwasher display will show the number of cycles.
Example:
0:00 is displayed for two seconds, then 6:32 is displayed for two seconds, and then the display turns off.
A total of 632 cycles were completed.
0:09 is displayed for two seconds, then 0:80 is displayed for two seconds, and then the display turns off.
A total of 9080 cycles were completed.
for more than 3 seconds – the program will cancel. You will hear a beep.
/
to select a new program.
and
illuminates.
goes out.
0:00
appears
for 2
seconds
then
appears
6:32
simultaneously until the
and
simultaneously until
0:09
appears
for 2
seconds
then
appears
0:80
EN-19
for 5
